ftp://220.194.47.155
STATUS:> [2008-5-28 11:10:05] Getting listing ""...
STATUS:> [2008-5-28 11:10:05] Connecting to FTP server... 220.194.47.155:21 (ip = 220.194.47.155)...
STATUS:> [2008-5-28 11:10:06] Socket connected. Waiting for welcome message...
[2008-5-28 11:10:06] 220 Microsoft FTP Service
STATUS:> [2008-5-28 11:10:06] Connected. Authenticating...
COMMAND:> [2008-5-28 11:10:06] USER anonymous
[2008-5-28 11:10:06] 331 Anonymous access allowed, send identity (e-mail name) as password.
COMMAND:> [2008-5-28 11:10:06] PASS *****
[2008-5-28 11:10:06] 230 Anonymous user logged in.
STATUS:> [2008-5-28 11:10:06] Login successful.
COMMAND:> [2008-5-28 11:10:06] PWD
[2008-5-28 11:10:06] 257 "/" is current directory.
STATUS:> [2008-5-28 11:10:06] Home directory: /
COMMAND:> [2008-5-28 11:10:06] FEAT
[2008-5-28 11:10:06] Informational Message Only:
211-FEAT
SIZE
MDTM
211 END
STATUS:> [2008-5-28 11:10:06] This site supports features.
STATUS:> [2008-5-28 11:10:06] This site supports SIZE.
COMMAND:> [2008-5-28 11:10:06] REST 100
[2008-5-28 11:10:06] 350 Restarting at 100.
STATUS:> [2008-5-28 11:10:06] This site can resume broken downloads.
COMMAND:> [2008-5-28 11:10:06] REST 0
[2008-5-28 11:10:07] 350 Restarting at 0.
COMMAND:> [2008-5-28 11:10:07] PASV
[2008-5-28 11:10:07] 227 Entering Passive Mode (220,194,47,155,5,129).
COMMAND:> [2008-5-28 11:10:07] LIST
STATUS:> [2008-5-28 11:10:07] Connecting FTP data socket... 220.194.47.155:1409...
ERROR:> [2008-5-28 11:10:28] The connection failed due to an error or timeout.
1) Verify that the destination IP address is correct.
2) Increase the connection timeout threshold under Global Settings | Connection.
3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
4) Verify that the problem is not local by trying to connect to an alternate server.
5) If a server name was used, verify it resolves to the correct address.
6) If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address.
7) Try pinging the address.
8) If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
9) Do a traceroute to the destination to verify all routers along the connection path are operational.
10) Verify that your subnet mask is setup properly.
11) Verify that your local software or hardware firewall is not blocking outbound connections originating from CuteFTP.
12) Verify that your anti-virus software is not at fault (try disabling it).
ERROR:> [2008-5-28 11:10:28] PASV failed, trying PORT.
STATUS:> [2008-5-28 11:10:28] Waiting 0 seconds...
STATUS:> [2008-5-28 11:10:28] Getting listing "/"...
STATUS:> [2008-5-28 11:10:28] Connecting to FTP server... 220.194.47.155:21 (ip = 220.194.47.155)...
STATUS:> [2008-5-28 11:10:28] Socket connected. Waiting for welcome message...
[2008-5-28 11:10:28] 220 Microsoft FTP Service
STATUS:> [2008-5-28 11:10:28] Connected. Authenticating...
COMMAND:> [2008-5-28 11:10:28] USER anonymous
[2008-5-28 11:10:29] 331 Anonymous access allowed, send identity (e-mail name) as password.
COMMAND:> [2008-5-28 11:10:29] PASS *****
[2008-5-28 11:10:29] 230 Anonymous user logged in.
STATUS:> [2008-5-28 11:10:29] Login successful.
COMMAND:> [2008-5-28 11:10:29] PWD
[2008-5-28 11:10:29] 257 "/" is current directory.
STATUS:> [2008-5-28 11:10:29] Home directory: /
STATUS:> [2008-5-28 11:10:29] This site supports features.
STATUS:> [2008-5-28 11:10:29] This site supports SIZE.
STATUS:> [2008-5-28 11:10:29] This site can resume broken downloads.
COMMAND:> [2008-5-28 11:10:29] REST 0
[2008-5-28 11:10:30] 350 Restarting at 0.
COMMAND:> [2008-5-28 11:10:30] PORT 192,168,1,102,18,152
[2008-5-28 11:10:30] 200 PORT command successful.
COMMAND:> [2008-5-28 11:10:30] LIST
[2008-5-28 11:10:31] 150 Opening ASCII mode data connection for /bin/ls.
[2008-5-28 11:10:31] 226 Transfer complete.
STATUS:> [2008-5-28 11:10:31] Directory listing completed.
